Heat insulation extruded polystyrene XPS sandwich panel
1, light weight, high strength,
2, flat surface & high performance
Heat insulation extruded polystyrene(XPS) sandwich panelsimple introduction:The product use XPS as the main material, both sides are covered with the interface agent, surface mortar and alkali-resistant fiberglass mesh. Structure:Structure: 2 layer polymer mortar plate+1 layer XPSSurface layer: polymer mortar layer reinforced by alkali-resistant fiberglass meshHeat insulating layer: XPSFoundation plate: XPSInstallation: sticking combined with fasteningMaxium size: 600mm~900mm(width),1200mm~2400mm(longth),20mm~100mm(thickness)Features:1, light weight, high strength, flat surface , with installation advantages and high performance/price ratio;2,very low thermal conductivity factor3,high impermeability4,good compression resistanceTechnical performance
project | performance |
Compression strength(kpa) | ≥150 |
Water absorption(V/V) (%) | ≤1.5 |
Humidity factor(ng/m.s Pa) | ≤3.5 |
Thermal conductivity factor 25°C (W/(m.K) | ≤0.030 |
combustion(grade) | B2 |
Application range:1,Roofing thermal insulation: Flat roof, inclined roof, steel roofing insulation, etc., and the insulation effect is more remarkable2,Exterior wall insulation:3,Insulation,heat insulation,waterproofing4,Ground floor insulation:5,Cold storage building insulation:6,Other special project: In cold areas, frost heave will cause highway, railways,airport runways to be rugged and underground pipelines to displacements.Can reduce the possibilities of subgrade icing caused by frost penetration to minimum., effective control of ground frost, to ensure the functon and vice life of road, underground pipes and other feautures. Attention:1,Though the flame retardant grade to B2,it does not mean it is noncombustible.Let is far away from fire in storage,transportation and construction.2, Prolonged surface ultraviolet radiation has damaging effects on the XPS,such as deformed and sparkling.Avoid the direct sunlight exposure for a long time.
Cement-covered Heat Insulation Extruded Polystyrene(XPS) Sandwich Panel
