UF and CMF system. Used in liquid/soild, liquid/liquid separation. water ultra filtration, pre-treatment before RO etc.  

UF system CMF system application areas:

This systems can be used in waste-water being reclaimed, removing bacteria and purifying tap water, normal river water purification, pre-treatment for reverse osmosis (RO) systems, pretreatment for sea water desalination, purifying & recycling industrial waste-water, concentration and separation allied on chemical industries.

The advantages of PP membrane:

PP hollow fiber membrane is robust and long working time.

High & stable flux in continuous filtration.

Less rigorous raw water quality, produced water meet RO system requirements & enhances longevity.

The tech. data of the feed in water

The size of particle	≤50um	BOD5	≤30mg/L
Turbidity	≤20NTU	CODcr	≤50mg/L
PH	1-14	Temp.	4-40
Working pressure	≤0.25Mpa	Max. pressure	≤0.40Mpa

The tech. data of permeated water

  Microorganism remove out    ≥99%

  Turbidity                  ≤0.2NTU

  SDI                      ≤2.5

The UF & CMF system can be designed tailoredly according to the amount and the quality of raw water.

The online back flushing with water/air can recover the flux rate of the UF membrane.

The UF or CMF system can be equipped automatically by PLC control panel.

UF and CMF system