Ads by Google
1.Introduction of PP Membrane
Performance of Hollow Fiber | Specifications |
Membrane characteristics | Hydrophilic |
Hollow-fiber membrane material | PP |
Effective Pore Size (micron) | 0.1 |
Inside fiber diameter (mm) | 0.35 |
Outside fiber diameter (mm) | 0.45 |
Typical Filtrate Flux(L/m2*h) | 15-50 |
2. Technical parameters of JF1-0440/0540/0840
Performance of Ultrafiltration Module | Specifications JF1-0440 | Specifications JF1-0540 | Specifications JF1-0840 |
Operation mode | Dead-end or crossflow | ||
Filtration model | Outside-in/ Inside-out | Outside-in/ Inside-out | Outside-in/ Inside-out |
Membrane area (m2) | 16 | 30 | 70 |
Number of hollow-fiber | 16000 | 36000 | 80000 |
Operating Pressure | 0.05—0.10 MPa | 0.05—0.10 MPa | 0.05—0.10 MPa |
Admission Transmembrane Pressure ( MPa ) | 0.25 | 0.25 | 0.25 |
Backwash Pressure ( MPa ) ( if any) | 0.20—0.25 MPa | 0.20—0.25 MPa | 0.20—0.25 MPa |
PH value of feed water | 2-13 | 2-13 | 2-13 |
Max thickness of continuous remaining chlorine of feed water (mg/L) | 150 | 150 | 150 |
Operating temperature | 5°C- 40°C | 5°C- 40°C | 5°C- 40°C |
The geometry size of Membrane module | φ 94 x 1125 | φ 140 x1120 | φ 225 x 1170 |
In & out water caliber of membrane module | DN 25 | DN 25 | DN 50 |
Material of Cartridge | ABS | ABS | UPVC |