Ads by Google
Hotel switch manufacturer for 12years in Guangzhou China
ONLENSE is a high security hotel switch manufacturer from 2001.ONLENSE located in Guangzhou China.There only10 minutes by taxi to Canton Fair,1 hour to Shenzhen by bullet train,2 hours to HONGKONG by bullet train.2 hours to Shanghai by plane.
The whole system for hotel lock there include:
high security hotel lock,card,Encoder,software ,and hotel switch.
Function of each part for high security hotel lock
The high security hotel lock ,which install on the doors,to keep room security.Encoder:To issue all the open door cards,the master cards,floor control card for waiters,building control
card,guest cards and so on.Card: To open the door,and insert to the switch to get power in room.Recorder:To collect the open door date,such as who,at what time,use which card to open the door.Hotel switch:instal in room,to control the room power after insert the open door cards.Software system:instal on computer to manage the whole working system,at the receiption,for guests check-in
and check-out.
Usually the Guest open lock by card and enter the room. Then he insert this card into this switch so that the room gain the power. if he leave the room, he should take the card away from the switch and the room will loss power 15seconds later.
our energy saving switch is following 4 types:
1. Any card switch(any card can gain the power)
2. IC card switch(Only IC card can gain the power):
3. 125KHZ card switch(such as Temic card or EM card can gain the power):
4. 13.56MHZ card switch(such as Mifare card can gain the power):
Detailed introduction for the whole hotel lock system
The whole hotel IC key card Lock System : | hotel key card lock,open door card,Encoder,software ,hotel switch. |
Working theory | Software installed on the computer,then use the Encoder to make all kinds of cards,use the cards to open the door and get power in the room. |
| Mortise A type lock(European standard) | door thickness should be 28-58mm and door side deep distance (distance from door side to the center of door hole) should be 80mm. If the door is with decorative bar, the distance from door side to the decorative bar should be over 90mm. |
| Mortise C type lock(ANSI standard) | door thickness should be 38-58mm and door side deep distance (distance from door side to the center of door hole) should be 110mm. If the door is with decorative bar, the distance from door side to the decorative bar should be over 110mm. |
Multiple functions: | card door lock |
Five levels of control | General control, building control, floor control, area control and room control. |
Password control | System password and operating password together to ensure security |
Cipher coding to key card | Each card has a different code that cannot be copied. Compulsory decoding will destroy the card automatically. |
| Area control | Cards of different types and levels can open different locks in different locations. |
| Timing control | Working clock is set inside locks to control the effective time limit of card keys. |
| File record | All issued card keys have records including each opening(also mechanical key opening). |
Loss reporting | Open function can be cancelled when the card is missed |
| Basic Technical Functional Index: | hotel IC key card lock |
Power Supply | DC6V, use of 4 pieces of No. 5 (or No. 7) AA batteries, with lack of voltage indications. |
Static Power Supply | 1u A |
Dynamic Power Supply | About 200mA |
Lifetime of battery | For the allowed door open times, it normally can exceed 10, 000 |
Inductive Distance | 3-10cm |
Record inside the lock | 1000 lines for standard type |
Setting Requirement | Working temperature -20'C~70º C, humidity: 98%max |
Anti-static Electricity | Totally closing status, the problem of static electricity is resolved |
Certificates of hotel switch
Hotel switch manufacturer for 12years in Guangzhou China
hotel switch manufacturer for 12years in Guangzhou China