YAG Laser Power Supply for Laser Cutting Machine Control is simple and reliable Intelligent fault detection Simplifying the tr

  YAG Laser Power Supply for Laser Cutting Machine

Specification 

1.Input voltage range: AC380±10% 50/60Hz 

2.Control Current: 60A-400A;

3.pulse width:0.2ms-20ms;

4.laser frequency:0.1 Hz - 500 Hz is dynamic. Each 1 Hz

5.the output power≤9KW( single light); ≤18KW(double light)

6.The power set parameters:Up to 99 waveform parameters can be set,Each wave is made up of current, pulse width frequency

7. PWM control signal frequency   2 k,Duty cycle range 10%-90%,Power control range)

8.Working Environment 

Working Temperature):-5--40°C

Relative humidity< 80% Non condensation) ,the air dusty<0.01g/m3.

9.Dimension

Integrated:     L×W×H=770×610×940(mm)

 Split type:      L×W×H=525×482×267(mm)( Case 1)

                       L×W×H=525×482×200(mm)( Case 2

Specification:

Input Voltage			AC 380±5% 50/60Hz
Control Current			100A-600A
Pulse Width			0.2ms-10ms
Laser Frequency			1Hz-100Hz  (0Hz Jogging control, 1Hz/ step)
Output Power			≤6KW (single lamp), ≤12KW( double lamps)
Parameter Setting			Max. 100 waveform parameter can be set, each waveform is composed by Max 15 sections.
Environment	Operating temperature		-5-40 degrees
	Relative humidity		≤80% (without dew)
	Dust		Less than 0.01g/m³
Dimension	Integrative type		770*610*940mm
	Split type	Single lamp	482*525*267mm (Single enclosure)
		Double lamps	482*525*267mm (Unit 1) 482*525*200mm ( Unit 2)

YAG Laser Power Supply for Laser Cutting Machine