Welcome to ECOL - Join Free - Sign In
LED bulb
LED bulb
Supplier Info
[China Supplier]
Contact Person : Mr. li berry
Tel : 86-755-28015866
Fax : 86-755-28015866
Product Detail
KM-5812A LED bulb can match an external lighting; it has the over current & voltage protection effect.

KM-5612A LED bulb

Product characteristics:

1, Lead-acid battery rechargeable and free maintenance with 1800mAH capacity high, long life, can be used circularly 500 times above;

2. 20 long life LED lamps, super brightness and white, low power consumption;

3. In “ON” condition, it can not only illuminate, but also has the emergency function; the LED can work at least 8 hours in emergency state;

4. High load efficiency, empty load and low power consumption switch; it has the over current & voltage protection effect. The power consumption is only 1.6W/HR.

5. The product can match an external lighting which has same voltage value and the same input voltage, and the power should be less than 60W.

Product use instruction:

1.Put the product’s switch to “ON” condition and insert it into the lamp holder(AC110~240V/50~60Hz), and not match the external light, put the switch of the holder to “ON” condition , the indicator bright, the LED lamps off and be in charging state; when it suddenly lost power, it has emergency function, the LED lamps will illuminate automatically; put the switch of the holder to “OFF” condition, it can be used for general lighting;

2.Put the product’s switch to “OFF” condition and insert it into lamp holder(AC110~240V/50~60Hz), and not match the external lighting, put the switch of the holder to “ON” condition, the indicator light, it only has charging effect, It takes about 6 hours for full charge.

3. When the product matched an external lighting, and insert it into lamp holder(AC110~240V/50~60Hz), put the switch of the product to “ON” condition, and put the switch of the holder to “ON” condition, LED lamps off and be in charging state, the external lighting bright; put the switch of holder to “OFF” condition, the external lighting off, the LED bright.

4. When the product matched an external lighting, and insert it into lamp holder(AC110~240V/50~60Hz), put the switch of the product to “OFF” condition, and put the switch of the holder to “ON” condition, the external lighting bright, the indicator bright, it only has charging effect; put the switch of the holder to “OFF” condition, the external lighting off, and the LED off.

Cautions:

For service life of the battery, when the ray of the light is becoming dim obviously, please stop using and charge it promptly;Do not apply to dimming lamp, electronic switch and humid environment;Do not apply to flammable and explosive environment;Do not shine eyes directly, so as not to damage the eyesight;When replacing the lamps or external lighting, please cut off the power supply;The power of external lighting should be less than 60W;Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations,
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.