Ads by Google
PTFE Hashima Oshima Fusing Machine Belt
Performance Plastics PTFE developed its belting materials for applications that require superior release characteristics, permeability for rapid drying, dimensional and thermal stability, and the dynamic strength to stand up to the most rigorous operating conditions. The unique behavior of the materials results in a product that is more practical and cost-effective than conventional belting materials.
1.Release Properties
The release characteristics of PTFE are superior to those of any other high temperature material. This non-stick property is retained over a full range of operating temperatures.
2.Permeability
Our belting combines a maximum amount of open area with good mechanical strength. The result is a very high level of controlled air flow through the belt, maximizing the rate of drying.
3.Dimensional Stability
The woven reinforcement results in an elongation of approximately 1% under normal mechanical loading, even at temperatures of 550°F. Length distortion is exceptionally low, while width rigidity and stability are enhanced by the high-modulus of the reinforcement.
4.Thermal Stability
Our belting may be used continuously at temperatures up to 550°F without reducing its performance.
5.Dynamic Strength
Our belting has been subjected to static and dynamic tests which indicate that it can withstand all normal operating conditions affecting service life.
6.Chemical Resistance
PTFE surfaces are unaffected by most chemicals and solvents.
Oshima Seamless Fusing Machine Belt
Item No. | Size | L(upper) | L(lower) | S(upper) | S(lower) | S(total) |
450F(GS) | 460 | 1540 | 1830 | 0.71 | 0.84 | 1.55 |
600F | 625 | 1400 | 2000 | 0.88 | 1.25 | 2.13 |
60LN | 625 | 1800 | 2400 | 1.13 | 1.50 | 2.63 |
60LD | 610 | 2450 | 2450 | 1.49 | 1.49 | 2.99 |
90LD | 910 | 2450 | 2450 | 2.23 | 2.23 | 4.46 |
Hashima Seamless fusing Machine Belt
| Item No. | Size |
| HP-220K(upper) | 220*1550 |
| HP-220K(lower) | 220*1830 |
| HP-220K-ii(lower) | 220*2230 |
| HP-330K(upper) | 330*1550 |
| HP-330K(lower) | 330*1830 |
| HP-450K(upper) | 450*1550 |
| HP-450K(lower) | 450*1830 |