16 LED magnetic flashling traffic warning
Model number: 2000R1 RECHARGER 1:1 TYPE
Battery | Li battery 700mAH/3.7V |
LED | 16pcs |
Brightness | RED color-6500-7000MCD |
A/C wall charger--INCLUDE | input voltage 100-240V, output voltage: 5.5V, 450MA |
Car charger--INCLUDE | 12-24V, output voltage: 5.5V, 450MA |
Charging time | 2-3hours |
Working time | See below |
Total 9 flash patterns, please check flash patterns and it's running time as follow:
Pattern | Run Time |
ROTATE | 9 HOURS |
QUAD-FLASH | 9 HOURS |
SINGLE-BLINK | 60 HOURS |
ALTERNATE | 9 HOURS |
SOS (MORSE CODE) RESCUE | 14 HOURS |
SOLID-ON HIGH | 5 HOURS |
SOLID-ON LOW | 35 HOURS |
2 LED FLASHLIGHT | 9 HOURS |
4 LED ILLUMINATE | 6 HOURS |
Note: Blue, Green and White color LED versions will run about 70-80% of listed times. Battery performance can vary from factors such as temperatures, age of the battery, etc.
STEP OF CHARGING:
1> Put the light on ground, back side is upturned.
2> Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.
3> Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug.
4> If you want to charger the light by A/C wall charger, please connect the AC charger to flare only. And if you want to charger the flare by Car adaptor; please throw the A/C wall charger and connect the car adaptor only.
*** When it is succeed charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED.