Ads by Google
tungsten carbide inserts
Products features:
1.The applied range of general processing milling cutter endmill GM series is very extensive and can achieve high-efficiency machining from ordinary steel to pre-hardened steel.
2.The cutting edge of this end mill is very sharp and cutting tool with a reasonable strength so that the cutting process is lighter and the cutting tool has a longer life.
3.The minimum specification of the endmill tool is 0.3 mm, even the minor part of the parts can be processed easily.
Tungsten carbide endmill mainly used in the side processing, step processing and rectangular groove processing of various parts.
Grade | Density g/cm3 | T.R.S Mpa | Hardness HRA | Grain Size µm | Performance&Application | Equivalent to ISO |
YG6X | 14.95 | 2600 | 92.0 | 1.0 | For making all kinds of carbide rotary cutting tools which are used in cast iron, hot resistant alloy steel, non-ferrous metal and nonmetal. At the same time it can be used for wear resistant parts. | K10 |
YG8 | 14.70 | 2800 | 90.0 | 1.2 | For making carbide wear resistant parts, rods and molds, meanwhile it can be used for semifinishing and finishing cutting tool at low speed for cast iron, nonferrous metal, nonmetal material. | K20-K30 |
YL10.2 | 14.50 | 3400 | 92 | 0.6 | It is suitable for indexable tool with submicro gain size with wide application. Used for processing of stainless steel, hot resistance steel, Cr, Ti, Ni alloy, synthetic material, non metal material , alloy steel even woods. | K20-K30 |