Roof Tile Roll Forming Machine is widely used for commercial metal buildings, associated with industrial parks and retail develo

Roof Tile Roll Forming Machine

APPLICATION:Metal step tile roof is widely used for commercial metal buildings, associated with industrial parks and retail developments. Step tile roll forming machine is the essential for its production

Roof Tile Roll Forming Machine

FEATURES:1. Hydraulic Decoiler with Breaking device is equipped for coil processing.2. Rollformer with tooling3. Hydraulic cut-off machine

4. Hydraulic pressing device5. Run Out Table or automatic stacking device6. Mitsubishi (Japan) PLC and Touchable Screen are used for data processing and setting.7. Roll forming speed is 10– 20 meter / minute.

Roof Tile Roll Forming Machine

TECHNICAL PARAMETER(1) Suitable Material:       PPGI Coil (2) Material Width:       914 / 1000 / 1220 / 1250 mm(3) Material Thickness:      0.40 -- 0.80 mm

Roof Tile Roll Forming Machine

Production Process:  decoiling – manual shearing – roll forming – step forming – cut-off after sizing – final step tile

Composition:1. 10 tons hydraulic decoiler: 1250 mm width; Ø 500 – 600 mm inner diameter; 4.0 kw2. Manual shearing device before material feeding: PLC calculating and controlling, material saved, no wasted.3. Roll forming machine: 18 – 24 Nos roller station; Ø 80 mm main shaft; 22 – 25 mm machine sidewall thickness; 5 kw servomotor; 3 – 10 meters / minute4. Hydraulic step forming & cutting-off: 10 tons working table pressure; with fan-cooler; 7.5 kw5. Simple run-out table: 3 meters6. PLC controller: Mitsubishi PLC; 5.7" Mitsubishi touchable screen; Japanese frequency converter; Schneider electronic components; length controlled by servomotor