1. The formed products are with high density and low porosity

2. Without internal flaw and surface cracks.

3. With simplified material-cooling technology, less labor strength.

4.The average percetage of pass can reach 99.99%. Hammer inspection is not needed.

5. DRO for mold temperature

6. Vacuum degree of the vacuum system can surpass -0.088Mpa.

7. The forming time is shoret, 1 piece of 1000mm electrode can be completed within 30 min. The monthly output can surpass 3000T.

8. The machine is suitable for graphite electrodes or carbon electrodes.

ELECTRODE FORMING MACHINES