1. High detection sensitivity 2.High detection signal-to-noise ratio 3.Frequency stepless speed regulation

Ultrasonic testing equipment

1)       Local flooding in steel pipes / steel bars for ultrasonic testing equipment

Equipment constitute

The devices are suitable for ultrasonic testing of all kinds of pipes, bars and other round materials.This equipment enables pipe longitudinal hurt, cross-injury, the oblique injury and layered thickness measurement detection, the detection of defects in the form of bars of flat bottom hole, cross slot, vertical ducts.This testing speed andacoustic couplingefficiencyishigh.It havethedetection ofhigh stability

Equipment comprehensive performance indicators

The detection sensitivity: meet the GB/T 5777-2009, YB/T 4082-2000, GB/T4162-2008,the relevant national standards

 

2)       Water film in steel pipes / steel bars for ultrasonic testing equipment

Equipment constitute

This equipment is suitable for larger diameter pipes, bars and other round materials ultrasonic detection. The system enables pipe longitudinal hurt, cross-injury, the oblique injury and layered thickness measurement detection, the detection of defects in the form of bars of flat bottom hole, cross slot, vertical ducts.

Technical Features

Water film coupling methodTo avoid probe adjustmentAvoid coupling of water treatmentFrequency stepless speed regulationSuitable for large diameter and thickness wall Anti-jamming technologyHigh detection sensitivityHigh detection signal-to-noise ratio

Equipment comprehensive performance indicators

The detection sensitivity: meet the GB/T 5777-2009, YB/T 4082-2000, GB/T4162-2008,the relevant national standards

 

3)       Rotating water chamber in steel pipes / steel bars for ultrasonic testing equipment

Equipment introduction

The device can perform the steel pipe, steel bar cross-injury and longitudinal hurt the detection of full coverage. This device flaw detection speed, high accuracy of flaw detection, and has customers all ages.

 Characteristics of the equipment

High speed,, high precision4 to 8-channel ultrasonic no blind testingAutomatic, semi-automatic, manual, debugging and calibration modesMeet or exceed thestandardsofGB, line standard, enterprise standard, ISO standards, ASTM standards, EN standards

 

4)         Wheel,hub and ringultrasonic testing equipment

Equipment introduction

After a pilot study developed for the train wheels, train tire and ring automatic flaw detection device.Maanshan Iron & Steel Wheel Company production line has been successfully applied.Tire and ring automatic ultrasonic inspection technology is difficult, demanding, and generally need to import foreign inspection equipment.Control Iron &Steel Research Institute is the only country able to independently undertake the design and manufacture of the enterprises of this kind of testing equipment.

Characteristics of the equipment

20-channel ultrasonic no blind testingWater film coupling / automatic track detection methodLine detection method fully automatic robotic arm action two types of artifacts, more than 10 kinds of specifications for a set of equipment to complete the Inspection During

Equipment comprehensive performance indicators

Sensitivity: Ø2mm flat-bottomed hole or according to user needsSignal to Noise Ratio: ≥ 10dBResolution: ≤ 10mm

 

5)       Pipe weld ultrasonic testing equipment

Equipment introduction

NC series straight weld ultrasonic testing equipment for welded pipe and spiral weld pipe break with traditional equipment, creating a unique probe tracking technology is better than Germany, Israel similar equipment.The series devices suitable for Ø76 ~ 1400mm of various calibres, straight weld pipe and spiral welded seam welded pipe flaw detection test.

 

Scope of the application

Oil and gas line pipe, automotive transmission tube, liquid to gas pipeline

Technical features

To avoid probe adjustment,Automatic seam trackingAvoid coupling of water treatmentAnti-welding interference techniqueHigh detection sensitivityHigh detection signal-to-noise ratio

 

6)         Steel plate and strip ultrasonic testing equipment

Equipment introduction

Comprehensive foreign steel plate (steel) ultrasonic flaw detection equipment, technical merit, the design characteristics of products for the domestic steel plate (steel) construction, especially in the fluctuations of the board track, plate bending head protection board side of the curved track, as well as on the durability design of the probe durability, with favorable results.

Scope of the application

Vessel steel plate, ship plate, abrasive flat, strip, etc.

Technical features

Up to 40 -200 detection channelsA transmitter to multiple receiver probe technologyFull board coverage testing inspectionAutomatic tracking and detection plate edgeAutomatic tracking and protection of the probe

 

 

7)       Steel tube-side ultrasonic testing equipment

Equipment introduction

National initiative to develop the pipe end ultrasonic flaw detection equipment, the essence of the comprehensive Germany, the United States similar equipment.The equipment consists of a walking beam, pipe end alignment raceway, the composition of the end of a pipe flaw detection roller tube end flaw host bi-directional ultrasonic longitudinal injury of two-way incident detection, cross-injury and oblique injury incident detection, thickness measurement and layered detection.

 

Equipment capabilities and technical specifications

Pipe end detection range: 0 to 500mm length of the arbitrary choiceDetect blind spots: 0With PRPFIBUS - DP on the inverter and servo motors, coding, etc. precise measurement and control of the whole digitalHuman-computer exchange of OP panel or host computer, to achieve automatic detectionStatistical testing : given the number of qualified products and waste root; given longitudinal injury (internal and external), cross-injury (and outside), the wall thickness of ultra-poor (upper or lower limit exceeded) StatisticsRecording and storage: records and storage the detection parameters, test results and the detection curvePrint test reports: preparation and printing of test reports (steel pipe at both ends of the test results give a unified report)Replacement specifications and calibration sample tube of time not longer than 15 minutes.

 

8)       The oil-tube drill pipe (upsetting) ultrasonic testing equipment

Equipment introduction

The device is unique, it broke the traditional oil-tube flaw detection mode, the detection capability is greatly enhanced, greatly simplifies the operation and calibration.

This equipment is suitable for all kinds of oil pipe diameter drill pipe (upsetting) of the ultrasonic testing. The system enables pipe longitudinal hurt, cross-injury, the oblique injury, thickness and layered detection.

 

Technical Features

Water film coupling methodTo avoid probe adjustmentAvoid coupling of water treatmentFrequency stepless speed regulationSuitable for large diameter and thickness wall High detection sensitivity

 

 

 

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v2/609449566_1/Ultrasonic_Flaw_Testing_Equipment.jpg' , 'http://i00.i.aliimg.com/photo/v2/609449566_2/Ultrasonic_Flaw_Testing_Equipment.jpg' , 'http://i00.i.aliimg.com/photo/v2/609449566_3/Ultrasonic_Flaw_Testing_Equipment.jpg' , 'http://i00.i.aliimg.com/photo/v2/609449566_4/Ultrasonic_Flaw_Testing_Equipment.jpg' , 'http://i00.i.aliimg.com/photo/v2/609449566_5/Ultrasonic_Flaw_Testing_Equipment.jpg' , 'http://i00.i.aliimg.com/photo/v2/609449566_6/Ultrasonic_Flaw_Testing_Equipment.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Ultrasonic Flaw Testing Equipment