SV-2LB-filter semiautomatic Smoke meter
SV-2LB-filter semiautomatic Smoke meter, which is produced according to the national standard GB/T11798.5-2001 and GB3847-83, can be used to detect the smoke level of diesel car ,the combustion analysis and the research of diesel engine.
The instrument cramps out a definite store of exhaust from vent-pipe and get them through a certain area of filter paper.
Then you can have the test result of exhaust concentration by the black granule on the filter paper (unit: Rb ).
SV-2LB, equipped with Nixie tube, is easy to operate by Prompt lamp and separately displays the lasted three test result and the average of them.
Addition: The strong point of SV-2LB: Air compression is not needed while it works.
The main technicalparameters:
1Measurement scope 0-10 Rb
2accuracyNot exceed FS ±3
3Repeatability: Not exceed FS ±2
4StabilityNot exceed FS ±2/h
5Resolution 0.1 Rb
6Environmental condition temperature0~40 Relative humidity20-80 Air pressure70~105kPa power AC 220V±10%50Hz
7Preheat time 5min
8Sampling system swept volume330ml±15ml swept actuation time1.4S±0.2S tightness of extracting pump
The air infiltration capacity is not exceed 15ml in one minute.
filter specificationwidth:40mm,thickness0.18mm,Equivalent pore diameter: 45um, air permeability :3000ml/cm2.min, brightness: 85Sampling tube: cylinder: 5mm, length: 5m.
SV-2LB smoke meter