1.measuring parameter:L/Q,C/D,R/Q,Z/Q,Z/D 2.100Hz-100KHz, 8 typical test frequencies 3.open,shortand load calibartion

LCR Meter, 100Hz-100KHz frequency, model MCH-2817

MCH-2817 LCR Meter is a high accuracy, wide measuring range impedance tester. With test frequency upto 100kHz, three test signal levels and capacity of measuring parameters such as Resistance(R), Capacitance(C), Inductance(L) and etc. It's equipped with a 240 × 128 dot , back-lighted LCD display which provides user friendly interface for measurement and operation.

Measuring Parameters	L,C,Z,X,R,G,B,D,Q,%,θ
Test Frequency	100Hz,120Hz,1kHz,10kHz,20kHz,40kHz,50kHz,100kHz
Level	0.1 Vrms ,0.3 Vrms ,1.0 Vrms
Accuracy	0.02%
Display Range	L 0.00001µH - 99999H C 0.00001pF - 99999µF Z,  X,  R 0.00001Ω - 99999MΩ G, B 0.00001 µ S - 99999S D, Q 0.00001 - 999999 % 0.00001% - 99999% θ Deg-179.99 - 179.999 0 Rad-3.1415 - 3.14159
Sampling Rate	Continuous, Single
Equivalent Circuit	Series, Parallel
Test Mode	Auto, Hold
Calibration	Open circuit, Short circuit, Freq. point and Sweep zeroing
Test Speed	Fast, Medium, Slow
Display Mode	Direct, , %
Operating Ambient	Temperature: 10C° - 30C°,Humidity: =80% RH(For accurate measuring); Temperature: 0C°- 40C°,Humidity: =90% RH(For operation only)
Power	220V(1±10%), 50Hz (1±5%)
Power Consumption	=60W
Dimension	330 mm × 150 mm ×430 mm
Weight	Approx. 6.5 kg

*Specificaitons are subject to change without prior notice.

LCR meter 100KHz frequency digital LCR meterMCH-2817