Ads by Google
Model AEC-500 high strength bolt testing machine is a kind of measuring instrument used for high strength bolt torsion, shaft forth coefficient (torque coefficient) and high strength bolt tension.
At present, common factory and quality inspect institution are still using shaft force meter. The moment test is done by manual torque wrenches, it takes a lot of labor force, and the accuracy of torque wrench is lower then ±4%, hardly to meet the test request. It can only determine the set point torque coefficient, can not know the variation tendency of the torque coefficient during the torque.
You can finish the operating like quick pre-tighten, torque (to the set point), unload, quick release by AEC-500 high strength bolt testing machine, you can also change the bolt when the machine is relax, operate the control key easily. It can continually display the torque value, tension value, torque coefficient curve. It can also long term store the data, print the result and transfer the data to the computer. It can be operated by one people, easily and high precision. The indication precision is ±1%, reduce down the labor force strength.
Model AEC-500 high strength bolt testing machine has two functions, torsion shearing test and release the bolt. No need any foundation to fix it.
Model AEC-500 high strength bolt testing machine has the measurement calibration condition for torsion and tension.
Max. torsion | 2000Nm |
Max. tension | 500N |
Indication relative error | ±1% |
Bolt diameter | Common type: M12, M16, M20, M22, M24, M27, M30 Torsion shearing type: M16, M20, M22, M24 |
Bolt length range | 40~280mm |
Indication precision | ±1% |
Dimension | 1200*600*105mm |
Weight | Mainframe: 265Kg fittings: 75Kg |
Power | Three phases four lines, 380V 600W |
High Strength Bolt Testing Machine