measure the penetration depth (into the sample material) of an indentor reacting against a calibrated spring load

Product DescriptionDurometers measure the penetration depth (into the sample material) of an indentor reacting against a calibrated spring load, and the result is given in Shore hardness degrees, displayed either on an analogue scale or as a digital readout. Durotech MDS Durometers separate the displacement measurement and display element from a module containing the indentor and spring. Additional modules can be purchased at any time if the scope of the material hardness alters. Each module is individually calibrated, its calibration status being unaffected by the host Durometers.Hardness values range from 0 (full penetration) to 100 (no penetration), Full penetration is between 2.46mm and 2.54mm (0.097 and 0.100 in) depending upon the equipment used. It is recommended that shore D is used when Shore A results are greater than 90 and shore A is used when shore D results are less than 20.The pocket MDS Universal Durometer is a robust instrument incorporating a precision analogue movement or digital display. It is traditionally styled with MDS technology, complete with tolerance hands. A maximum hand option is available and the model fits to any operating stand for improved repeatability. The modular setup allows simple & quick changing of shore modules.

Test DescriptionFit the instrument with the correct module. Place and press the instrument perpendicular to the surface to be tested and read off the result.

Part NumbersD202 Digital Durometer with 1 Module, D20200 For 00 Module.B202 Analogue Durometer with 1 Module, BS550 Durometer Stand.

Complies with Standard(s)JIS K6301, JIS K6253, ISO 868, ISO 7619, ISO 48, DIN 53519, DIN 53505, ASTM D2240, ASTM D1415

Hardness Testing of Polymer Materials