Digital  Portable Miceoscope  TC-006 Manual  PACKING CONTENT 1) TC-006 Unit2) User Manual3) Mini-USB Cable4) Pouch

You can choose the proper LED brightness when you observe the close-up object.

You can use the provided rule to measure the observed object. The length represented by every bar is displayed on the right of the rule. Take the diagram below as an example, every bar represents 0.1mm, you can calculate the length of the object according to the bars it takes up.

 BASIC OPERATION

Install 4 pieces of AAA batteries in TC-006.Power on your TC-006 by pressing and holding the POWER button for 2 seconds.Place your observed object below Digital Magnifier’s Lens.The object will be displayed on the screen. Adjust the DISTANCE DIAL button to get the best image of the object.Turn the DISTANCE DIAL ,you will find two clear dots, which are in accordance withthe smaller zoom ratio(10X optical magnification) and the largerzoom ratio(17X optical magnification).

Turn the DISTANCE DIALup/down until the rule is displayed, and then adjust it properly to get the clear image.This camera provides the Off / Low brightness/Middle brightness/High brightness modes.

 ADVANCED SETTING It provides various options to customize yourTC-006. Press MENU button for advanced setting. To make selection, turn ZOOM WHEEL left/right and press up/down key to highlight your selection, press CAPTURE/OK to confirm.

SYSTEM REQUIREMENT