Mould coller 1.Use the water as the medium, 2.By heating or entering warter to get the temperature you want

Mould coller:

This is an automatic controller for the temperature ,use the water as the medium

Theory:

Set the temperature which you want first ,

when the temperature is lower than the temperature ,the heater work ;

when the temperature is near the set data ,the heater stop work ;

when the temperature is high than the set data ,the medium is entered in the machine ,

then the temperature is near the set data .

All these process is automatic .Through these process ,you can get constant temperature .

If the mould is controled in the constant temperature ,it will be easy to control the dimension of the products ,get the product with good surface ,constant quality .