KSD1 D/J type ceramic thermostat
1.ceramic body,
2.horizontal terminals,
3.VDE,UL,JET,KTL approved
4.250v/10a or 125v/15a
KSD1 D/J type ceramic thermostatCharateristicKSD1 and KSD series thermostats are one type of small bimetal temperature controllers with shells. The influence of certain ambient temperature on its thermal bimetal disk would result in the deformation of the disk, and its instant movement drives the contact and other components to open or close the electric appliances and equipments. In short, it is a reliable, long-life and non-interference thermal device with fixed working temperature.Application:The products are suitable for temperature control or overheat protection for such as hot-water heater, kettle, water dispenser, electronic disinfection device, dryer, microwave oven, electric heater, coffee machine, sandwich maker, vacuum cleaner, electric mop, toaster, soybean milk maker, electric irons and other home appliances and other electro-thermal devices and machines like electric motors and copier.Instructions:* Don’t let water or other liquid leak into the thermostat.* The surface has to been installed flatly and evenly with calorific surface.* The body case should not have any crack; the shape of terminal can’t be changed at will.Technical specifications
| Electrical Rating | AC 250V Resistive load 10A or 16A; Inductive load 8A |
| AC 125V Resistive load 15A; Inductive load 12A |
| AC 250V Resistive load 25A |
| Operating Temperature | 0~260 °C |
| Tolerance | ±5°C,±3°C |
| Differential | 10~40 °C |
| Endurance Test | UL,CUL: (25~210°C) 100000 cycleVDE: (0~260°C) 250V/16A 6000 cycle,250V/25A 5 cycleCMJ: (250°C) 10000 cycleKTL: (0~210°C) 250V/11A 10000 cycleCQC: (5~260°C) 250V/10A 10000 cycle |
| Dielectric Resistance | AC50Hz 1800V for 1second |
| insulation Resistance | More than 100MΩ (DC500V megger) |
| Contact Resistance | Less than 50mΩ (DC6V/1A milliohm meter) |
| Heat Resistance | Max operating temperature 260°C |
| Max contact temperature 260°C |
| Normal Contact Status | Open / Close |
Installation requirements
The enters of installing | 23.8mm 24mm 25.5mm 30mm |
Installing Forms | a. Activity type b. Fixed type c. Pressure plate d. Custom mode |
Size | 4.75mm×0.5mm or 4.75mm×0.8mm or 6.35mm×0.8mm |
Terminal type | horizontal terminal |
vertical terminal |
both terminals 30/40/45 deg bend upward |
It can be custom mode to suit your need |
KSD1 D/J type ceramic thermostat
