CWT5016 gps tracking system has been designed as a cost effective, low power, self contained data logger. It combines 4 digital inputs, 4 drivable relay outputs, 4 analog inputs and 4 special temperature sensor inputs with embedded GPS and GSM/GPRS module to provide an all in one instrument for GPS tracking, data logging, remote data acquisition, alarm and control.
It uploads real time data on schedule or alarm or pre-defined condition happens via SMS or GPRS. Alarm levels can also be set for any of the digital inputs, analog inputs and temperature inputs; it support User-defined SMS alarm messages and the outputs can also be controlled via SMS or GPRS.
CWT5016 comes with an easy to use configuration SW for setting up all parameters, including setting alarm levels or states and pre-defined conditions for GPRS transmit etc. The configuration can be done on a PC or from sms command.
Its internal 256KB memory logs more than 1000 records. Flexible data logging interval starts from 1 minute up to 24 hours.
GPS tracking + temperature monitor + data acquisition + GPRS transmission + sms alarm + data logger
Overview
GPS Data & Measurement LoggingUpload data & GPS information via GPRS and sms on schedule or alarm triggered.Programmable data logging and upload intervalBuild-in High performance GPS module, Using NMEA protocol.Report Lat and Lon, Speed by SMS or GPRS via user setup.Require the GPS information by SMS or GPRS commandAuto inserts GPS information with Alarm SMS and Report SMSSupport Google Earth in the Server end to view the GPS position4 digital inputs4 Analog inputs (receive 4~20mA or 0~5V)4 drivable relay outputs4 DS18B20 temperature sensor inputsSpecifications
Parameter | |
DC Power supply | 9-28V DC (Standard adapter: DC 12V/1.5A) |
Power consumption | 12V input Max. 150mA/Average 50mA |
Frequency range | Dual-frequency 900/1800/850/1900Mhz |
SIM Card | Supporting 3V SIM Card |
Antenna | GPS and GSM SMA Antenna interface |
Serial | RS232 |
Temperature range | -30°C ~ +70 °C |
Humidity range | Relative humidity 95% |
Digital Input | 4 digital inputs(Dry contact) |
output | 8 drivable relay outputs(open-collector outputs) |
Output drive voltage | Equal to input DC voltage |
Output drive power | Drive voltage ≤35V, drive current ≤200mA |
Analog Input | 4 analog inputs(4~20mA or 0~5V) |
Temperature input | 4 DS18B20 inputs (temperature range -55°C ~ +125 °C ) |
memory | 256K |
Exterior dimension | 130×80×25mm |
Weight | 370 g |
Feature
Temperature & Humidity monitor
4 DS18B20 temperature sensor inputs, monitor temperature range is -55°C~125°CAnalog inputs can connect humidity sensorAlert by sms or GPRS when temperature & humidity is above the normal rangeRemote query temperature & humidity by sms or GPRSRemote preset temperature & humidity high or low levelUpload temperature & humidity on schedule or interval by GPRS or SMSTank levels monitor
Analog inputs connect pressure sensor to monitor tank water or oil levelAlert by sms or GPRS when tank level is high/lowRemote query tank level by sms or GPRSRemote preset tank level high or low levelUpload tank level on schedule or intervalMeasuring water flow
Input can be pulse counter to measure water flowUpload data on schedule or intervalSecurity & burglar alarm
Connect PIR, vibration sensor to alarm via sms and GPRS when someone illegalConnect smoke sensor, gas sensor to alarmConnect panic button, driver press it to alarm via sms and GPRS when the emergency appearsRemote control
Remote control 4 outputs on/off/pulse by sms or GPRSApplications
Fleet management of cold food truck
Tracking temperature/humidity levelsTracking truck positionAlert on high/low temperature/humidityFire vehicles/tanker central management
Tracking fire vehicle water tank level or tanker oil levelTracking fire vehicle/tank positionAlert on low water/oil tank levelgps tracking system