Capillary Thermostat WHD-S style Certificates:CE&CQC Temperature range:-35C~ 350C Rated at: 16A/250V,50/60HZ Stainless steel

Parameter:

1)Designed temperature range: -35°C ~ 350 °C

2)Capillary Length: 300-3000mm

3)On-off temperature difference: 3°C- 10°C

4)Fitting size:28±0.25mm

5)Rated at 16A/250V 50/60Hz

6)Main body temperature: T90 / T150

7)Electric strength: 800v/s between two pin.

8)Insulation resistance≥100MΩ

9)Control type: mechanical temperature controller

10)Contact resistance:≤50MΩ

11)Operating life: ≥ 100,000times

12)Certification: CE and CQC

13)Used for electric water heater, washer, electric oven, fried pan and refrigeration industryetc.

14)Manufactured on customers' request

15)Welcome your consults at any time

Attentions

1, The whole bulb is supported closely aligns controlled temperature surface while thermostat installation, to achieve accurate temperature control purposes. 

2, The installation must not be a bulb pressure deformation, so as not to affect its performance.

3, Don't make electricity gas and electricity material in a thermostat or contaminated thermostat surface to avoid affect the electrical insulating performance.

4, Switch box is that the electrical appliances ceramic part to handle gently and avoid damage

5, The bending radius of capillary is not less than 5mm.

MODEL	Temperature Range	Difference	Sensitivity	Capillary length(mm)	Thermometer Bulb Length(mm)
WHD-40S	0-40°C	≤4.5°C	±5°C	400-1800	(110)
WHD-85S	30-85°C	≤4.5°C	±5°C	400-1800	(50)
WHD-93S	30-93°C	≤4.5°C	±5°C	400-1800	(45)
WHD-110S	30-110°C	≤4.5°C	±5°C	400-1800	(40)
WHD-250S	50-250°C	≤8°C	±8°C	500-1500	Φ3×170
WHD-320S	50-320°C	≤10°C	±8°C	500-1500	Φ3×130

If it is a kind of Capillary Thermostat you are interested in, then please don’t hesitate to contact us in any way, and we will always try and  help the most.

Lots of other capillary thermostats and spare parts are available. We would love to provide you their information as soon as we hear from you.

capillary Thermostat or temperature sensing