Model

Specification

  MS-35-5

  MS-35-12

  MS-35-24

MS-35-24

DC output voltage

    5V

    12V

  15V

 24V

Output voltage rang(Note:2)

  +/-2%

  +/-1%

 +/-1%

+/-1%

Rated output current

   7A

   3A

  2.4A

1.1A

Output current range

  0-7A

  0-3A

  0-2.4A

 0-1.1A

Wave and noise(Note:3)

  70mVp-p

  100mVp-p

 100mVp-p

100mVp-p

Inlet stability(Note:4)

  +/-0.5%

  +/-0.5%

  +/-0.5%

+/-0.5%

Load stability(Note:5)

  +/-1%

  +/-0.5%

  +/-0.5%

+/-0.5%

DC output power

  35W

  36W

  36W

35W

Efficiency

  70%

  76%

  78%

72%

Adjustable range for DC voltage

+10,-5%

+/-10%

  +/-10%

+/-10%

AC input voltage range

85~132VAC/170~264VAC selected by switch 47~63Hz;240~370VDC

Input current

0.8A/115V   0.45A/230V

AC inrush current

Clod-start current 18A/115V 36A/230V

Leakage current

   <0.5 mA/240VAC

Overload proctection

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

Over-voltage proctection 

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

High-temperature  and protection

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

Temperature coefficient

  +/-0.03(0~50)

Setup, rise,hold up time

200ms,100ms,30ms

Vibration

10-500Hz,,2G10min,/cycle, periodfor 60min,Each axes

Withstand voltage

Input and output interal:1.5KvAC,Input ad enclosure:1.5KvAC

Output and enclosure:0.5KvAC

Isolation resistance

Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ

Working temperature and humidity

-10+60(Refer to output derating curve),20%90%RH

Stoerall dimension

-20+85.10%~95%RH

Overall dimension

85*58*38mm

Weight

0.4Kgs

Safety standards

Meet UL1012 requirement(Not apply for the mark)

EMC standaras

Meet FCC PART15J Conduction class B

Note:1The testing condition for the paramenter aboveis:230VAC input,rated load,2570%RH

Temperature.

2Error.include the setting error,line stability and load stability.(Note;5).

3Wavetest:adoptingA12 double wire for 20MHz,and0.1UF and 47UF  capacitor short-circuit fou interrupting

4Inlet voltage stability test: when is over load,the lowest voltage of inlet is up to the highest voltage.

5Load stability test:The load is from 0%to 100%