Welcome to ECOL - Join Free - Sign In
LED Emergency power supply for T5 /T8 tube
LED Emergency power supply for T5 /T8 tube
Supplier Info
[China Supplier]
Contact Person : Mr. zhang fang
Tel : 0086-760-23838519
Fax : 0086-760-23838520
Product Detail
LED Emergency power supply for T5 /T8 tube 1auto-test 2CE&ROHS Cer 3OEM order avalaible 4recharge/discharge protection

LED Emergency power supply for T5 /T8 tube

OVERVIEW

Malon emergency light, adopted high efficiency T8/LED fluorescent tube, specialized in low consumption, long life span and high efficiency of electrical -to-optical converting.The device, instantly alternating operatation status on power interruption, conflagration, earthquake, indicating precise emergency exit direction, is applicable to hotel, restaurant, shopping mall and tall building etc.

This series of product could be used as normal lighting in general; While the AC shutted down, the emergency lighting activates instantly no matter how the status of the switch.

Key Figure

NOMINAL VOLTAGE      AC220~230V50/60Hz

CHARGE PERIOD       ≤ 24 hours

LAMP                    18W/LED

DURATION               ≥120 mins

RATED LUMEN OUTPUT  600Lm

IDEAL TEMPERATURE  -0°C ~ +40°C

BATTERY               Ni-Cd 4.8V 4.5A h

Caution

1. For proper usage, please read this manual carefull before charging on AC.

2. The main power of the emergency light should be pluged into individual switch rather than with the same switch for general light or electrical equipment.

3. For illuminant replacement, the substitution must be with the same specification parameter. Since the device plugged into AC220V, power interruption should be primary prior to guarantee safety.

4. The device adopts evacuated Ni-HM battery pack, please charge for 24 hours before application. The initial duration might be insufficient by prolonged unocupation, please charge/discharge for 3 times thoroughly (charge for 18 hours and discharge until the battery empty), then the battery would be recovered.

5. For fuse replacement, the substitution must be with the same specification parameter (Read the nominal parameter on circuit board). Since the device plugged into AC220V, power interruption should be primary prior to guarantee safety.

6. After application, please immediately plug into AC220V and charge for 24 hours. Prolonged unoccupation might affect the battery life-span, we suggest to charge/discharge every 3 months minimum. Charge/discharge every 6 months in general application. Replace the battery while discharging period is 50% less than the nominal regulation. For detail information on battery, please contact with the manufacture.

7. On application, device must be ground connected by grounding sign.

....

LED Emergency power supply for T5 /T8 tube

Related Products
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.