Model

Specification

               D-50A

              D-50B

    CH1

    CH2

   CH1

  CH2

DC output voltage

    5V

    12V

   5V

 24V

Output voltage rang(Note:2)

  +/-2%

  +5,-8%

 +/-2%

+/-8%

Rated output current

  6A

   2A

  6A

1A

Output current range

  1-6A

  0.3-2A

  1-6A

  0.2-1A

Wave and noise(Note:3)

  50mVp-p

  100mVp-p

  50mVp-p

  100mVp-p

Inlet stability(Note:4)

  +/-0.5%

  +/-1%

  +/-0.5%

  +/-1%

Load stability(Note:5)

  +/-0.5%

  +/-5%

  +/-0.5%

  +/-8%

DC output power

                54W

              54W

Efficiency

                73%

              73%

Adjustable range for DC voltage

CH1+10,-5%

         CH1+10,-5%

AC input voltage range

85~132VAC/170~264VAC selected by switch 47~63Hz;240~370VDC

Input current

1.3/115V   0.65A/230V

AC inrush current

Clod-start current 18A/115V 36A/230V

Leakage current

   <0.5 mA/240VAC

Overload proctection

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

Over-voltage proctection 

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

High-temperature  and protection

105%~135%Type:pulsing hiccup shutdown Reset:autorecovery

Temperature coefficient

  +/-0.03(0~50)

Setup, rise,hold up time

200ms,50ms,30ms

Vibration

10-500Hz,,2G10min,/cycle, periodfor 60min,Each axes

Withstand voltage

Input and output interal:1.5KvAC,Input ad enclosure:1.5KvAC

Output and enclosure:0.5KvAC

Isolation resistance

Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ

Working temperature and humidity

-10+60(Refer to output derating curve),20%90%RH

Stoerall dimension

-20+85.10%~95%RH

Overall dimension

159*97*38mm

Weight

0.52gs

Safety standards

Meet UL1012 requirement(Not apply for the mark)

EMC standaras

Meet UL1012 requirement(Not apply for the mark)

Note:1The testing condition for the paramenter aboveis:230VAC input,rated load,2570%RH

Temperature.

2Error.include the setting error,line stability and load stability.(Note;5).

3Wavetest:adoptingA12 double wire for 20MHz,and0.1UF and 47UF  capacitor short-circuit fou interrupting

4Inlet voltage stability test: when is over load,the lowest voltage of inlet is up to the highest voltage.

5Load stability test:The load is from 0%to 100%