Switching Power Supply S-40 1..INPUT:85 ~ 264VAC 2.CE RoHS Approval 3.DIMENSION: 129*98*38mm (L*W*H) 4.1 Year Warranty

40W Single Output Switching Power Supply S-40 Series 

 

Features:

Universal AC input / Full  rangeProtections: Short circuit / Overload / Over voltageCooling by free air convection100% full load burn-in testFixed switching frequency at 75KHz1 years warranty

   

S-40 SPECIFICATION:

 

MODEL	S-40-5	S-40-12	S-40-15	S-40-24
DC VOLTAGE	5V	12V	15V	24V
RATED CURRENT	8A	3.5A	2.8A	1.8A
CURRENT RANGE	0 ~ 8A	0 ~ 3.5A	0 ~ 2.8A	0 ~ 1.8A
RATED POWER	40W	42W	42W	43W
RIPPLE & NOISE (max.) Note.2	75mVp-p	100mVp-p	100mVp-p	100mVp-p
VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%
SETUP, RISE TIME	300ms, 50ms/230VAC     800ms, 50ms/115VAC at full load
HOLD TIME(Typ.)	70ms/230VAC     15ms/115VAC at full load
VOLTAGE RANGE	85 ~ 264VAC       120 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	72%/115VAC	76%/115VAC	76%/115VAC	78%/115VAC
AC CURRENT	1.2A/115VAC     0.6A/230VAC
INRUSH CURRENT(max.)	COLD START 25A/115VAC 50A/230VAC
LEAKAGE CURRENT	<1mA / 240VAC
OVERLOAD	105 ~ 150% rated output power
	Protection type : Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V
	Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC , 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS	Design refer to UL1012, UL1950, TUV EN60950
WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT	Compliance to EN61000-3-2,-3
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
MTBF	314.1K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	129*98*38mm (L*W*H)
PACKING	0.412Kg; 45pcs/20.43Kg/0.0326CMB
NOTE:1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Mechanical Specification: