Neworigin Specail steel Since 1994. Warehouses total: 20,000 square meters with 13,000Mt daily stock;

General Information:

General purpose medium carbon steel delivered in as rolled condition. It can be further heat treated to achieve specific mechanical properties. The 0.45% carbon content is not favorable for welding. However, it can be weld with appropriate pre and post weld heat treatment. Surface hardness of 57~62 HRC can be achieved with cast hardening to a depth of approximately 1mm. Used for most transmission and motor parts of medium strength. Case hardened parts such as camshafts, gears, rocking levers etc. Simple hand tools and various types of fasteners and fixtures, machinery parts and components with medium stress.

  

Comparable Standards:                                                                                                       

AISI/SAE	DIN	W.Nr.	AFNOR	JIS	BS	SIAU	GB,YB
1045	CK45	1.1191	XC48	S45C	-	-	45

 Chemical Analysis (%):                                                                                                         

C	Mn	Si	Cr	Ni	Mo	P	S
0.42-0.50	0.50-0.80	0.40	0.40	0.40	0.10	0.035	0.02-0.04

   

Hot work and heat treatment temperatures                                                                        

Forging	Normalization	Subcritical annealing	Isothermal annealing	Hardening	Tempering
1100~850*	840~880	650~700*	820~860600x1h*	820~860 water	550~660

---------------------------------------------------------------------------------------------------------------------------------

                                                                                                                                                                                         

Product and Service - category                                                                                                                

More photos from Neworigin special steel: 

Warehouse in Shenzhen:

Stockings and products:

Our own Independent Labs

Neworigin has it's own labs to do all the tests and analysis of the materials. With full

equipments, the lab also could provide third party inspection services. We offer spectral

chemical analysis, mechanic tests, UT tests and microstructure analysis etc.

Test Equipments:

Sawing machine:  

Max sawing size: 800mm*6000mm

Office:

Factory:

Rolling:

Our own certifications:

45#, S50C, S45C, 1045 carbon steel