Ads by Google
| NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING (EN 10255) | |||||
| Standard: EN 10255:2004 | |||||
| Steel grade: S195T | |||||
| Delivery condition: Hot-finished | |||||
| Size range: OD Φ70MM-Φ610MM, WT 6MM-35MM, according to EN10255:2004 | |||||
| Tolerance: according to EN10255:2004 | |||||
| Length: customized according to requirements | |||||
| Certificate: EN10204/3.1 | |||||
| GENERAL INFORMATION | |||||
| Pipe made of non-alloy steel tubes suitable for welding and threading. | |||||
| DELIVERY CONDITION | |||||
| Steel grade | Delivery condition | ||||
| S195T | Hot-finished | ||||
| Unless otherwise specified the tubes shall be supplied bare with plain ends. The tube ends shall be cut nominally square to the axis of the tube and shall be free from excessive burrs. | |||||
| CHEMICAL COMPOSITION (CAST ANALYSIS) IN% | |||||
| Steel grade | C | Mn | P | S | |
| max | max | max | max | ||
| S195T | 0.20 | 1.40 | 0.035 | 0.030 | |
| MECHANICAL PROPERTIES | |||||
| Steel grade | Yield strength Min (Mpa) | Tensile strength Min(Mpa) | Elongation A Min(%) | ||
| S195T | 195 | 320-520 | 20 | ||
Note: L: longitudinal | |||||
ERW Welded Carbon Steel Pipe EN10255