Stainless Steel water tank spot welding machine Model No: DN-16 duty cycle: 20% input voltage : 380/220/440V

Stainless Steel water tank spot Welding Machine

Name	spot welding machine	air source pressure	0.3-0.5MP
Model No.	DN-16	duty cycle	20%
input voltage	380V	welding thickness	0.8+0.8MM
rated capacity	16KVA	arm length	1250MM
rated frequency	50HZ	height of lower ground	1200MM
adjust stages	7 degree

Water tank equipments operation notes

squeeze time: 170 cycle ( fixed )

Welding current: around 400 (According to the actual thickness increase or decrease, while increase or decrease ,only adjust the units, increase or decrease for 5 units, adjustment after tested )

welding time : 2 cycle (fixed)

off time : 3cycle (fixed)

welding pulse : 250 (fixed)

Generally, oil-water separator (near the machine’s body behind) barometer pressure in 0.6 MPA , cylinder barometer (near the head position of machine) the pressure about 0.25.

When installing the cylinder of machine’s head, both sides of the 8 screws to connect with the gas and pedal switch, and pedaled the switch until running smoothly of upper cylinder and lower cylinder, then lock screw slowly . Must ensure the cylinder runs smoothly

Stainless Steel 304 201 316 water tank spot welding Machine