injection led module 1. adopt high brightness led chip 3528 2. two install way 3. warranty: 2 years 4. lumen: 20lm

A. 3528 injection led module:

1. The product adopt 3 pcs super bright SMD 5060 LED as lts luminous body.

2. Material : Aluminum housing,white sealant 80mm wire between  two modules,20pcs in one series for packaging;

3. Working condition: DC 12V

4. Availabale color:Red,Green,Blue,Yellow, Pure White,and RGB full color;

5.Waterproof IP Rank : IP65;

6.Others: 3M adhesvie tape on the back.

B. Application:

1.Bus, Shuttle, Railcar passenger interiors

2. Uninterrupted Emergency lighting

3. Focused reading and task lighting

4. Interior design uses

5. Closet illumination

6. Cove lighting

7. Marine recreation applications

8. Concealed accent lighting

9. Edge lighting

10. Under counter lighting

11. Cubicle, workbench lighting

12. Recreational vehicle interiors

C. Data sheet:

Part No	MD5050W4	MD5050W3	MD3528W3
LED Quantity	4Pcs	3 Pcs	3 Pcs
Input voltage	DC 12V
Input current	0.0888 A	0.0453 A	0.0223 A
Input Power	1.065W	0.544W	0.268W
Power factor	>0.9
Power efficiency	>90%
Projection distance	±1m
Luminous	53.8	42.948	20.16
Lighting efficiency	>80%
color temperature	6000±500K
Coloration Index	Ra>80	Ra>75	Ra>75
Working temperature	-20~40°C
Storage temperature	The storage temperature is -25~60°C in no operating mode
Life Span	>30000Hrs
Material	ABS & epoxy resin
Dimension	55*34*6MM	68*19*6MM	68*19*6MM
Net weight	12g	8g	8g
IP Rank	IP65
Quantity	1/20

D. Package information:

Indoor and outdoor lighting

Warning

Please do not connect power supply when the light is still in box.

Change the protection cover completely if it was broken.

Pay attention to anti-fire, anti-electricity and anti-shake.

Please kindly read the instructions before installation, and keep it well for your future reference.

Notice

Caustic or dissolvent chemicals may damage the protection crust.

Normal working temperature : -35 °C -40 °C , if overrun the range, it will effect the lifespan of lamp. Storage temperature is -25~ 60 °C

If you operate it with other components not from us , we have no responsibility when something happened.

Common failures and solutions:

If the lamp can not light up, please check whether it connects power supply well and whether the switch is on.

If the lamps frequently turn on and off, please check whether the connection between power and lamp is fixed enough.

Note: Please contact with technicians in case of above solutions don't work.

Attention:

Please do not use rough or cleanser to wipe this products, do not use high press water to wash this product that it would be harmful for the waterproof components.

Please do not use sharp conents to stab this products, or it does harm for internal components.

Please do not force the products

After reaching the lifespan please contact your local relative authority or retailer to ask for recycle suggestion.

Recommended working environment temperature is -20~ 40 °C

Please do not working if the fixture or wire damage, please check it regular

Should be installed by professionals

Remarks: If there is any change for the product, we won't inform again.

If any confusion about the specification, please ask for qualified engineers.