--ISO Certificate --Favorable Price In China --Good Aftersales Services

 

Characteristics of product

 

1.High modularization design: may equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.

 

2.Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.

 

3.Form of installation: the position to be installed is not limited.

 

4.High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.

 

5.Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.

 

6.Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low;

 

7.Parallel axis -bevel wheel speed-down motor; 

 

 

Available versionsSingle-stage or multi-stageFoot-mounted or flange-mountedFoot-mounted and flange-mountedFlange-mounted with extended bearing hub

 

	RX series (single-stage)
	For high output speeds, the exclusively single-stage gear units RX57 to RX107 offer compact solutions for your system design.

  

Technical data
Gear unit reduction ratio	[i]	1.30 to 8.65
Output torque	[Nm] ([in-lb])	36 to 830 (315 to 7340)
Motor power range	[kW] ([Hp])	0.12 to 45 (0.16 to 60)

 

R series (two-stage and three-stage)

Our complete range of helical gearmotors provides the optimum size and power solution for every drive task. And for applications where weight is an issue, our multi-stage gear units provide something special: Thanks to their die-cast aluminum design, the models R07, R17 and R27 are three particularly efficient lightweights – ideal as satellite drives and for use in light machine constructions. Reduced backlash helical gear units are also available for particularly precise requirements.

 

 

Technical data
Gear unit reduction ratio	[i]	3.21 to 289.74
Multi-stage gear unit reduction ratio	[i]	90 to 27001
Output torque	[Nm] ([in-lb])	31 to 18000 (270 to 159300)
Motor power range	[kW] ([hp])	0.09 to 160 (0.12 to 215)