Ads by Google
MCH Spectrum Analyzer Product,SM-5011 Spectrum Analyzer:
SM5011 is equipped with a tracing signal generator, and in the combined use of spectrum analyzer/tracing signal generator. it can complete the work which cannot be done by other frequency sweep system, such as sweep generator/network analyzer, sweep generator/spectrum analyzer, and sweep generator/oscilloscope, etc.
Specifications:
| Input frequency response | 0.15-1050MHz, 3dB |
| Display accuracy ofcentral frequency | +/-200KHz (frequency sweep width +200KHz) |
| Accuracy of mark frequency | +/-0.1% (frequency sweep width +100KHz) |
| Frequency display resolution | 100KHz (4½ bit LED display) |
| Frequency sweep width | 0.1MHz/div-100KHz/div with 1, 2 and 5 step systemAnd 0Hz/div (0 frequency sweep) Accuracy: +/-10% (each range) |
| Intermediate frequency bandwidth | 20KHz and 400KHz |
| Video filter | (When on) 4KHz |
| Amplitude range | -107~+13dB |
| Reference level | -27dB~+13dB (10dB for every step) +/-2dB |
| Average noise level | -97dB(20KHz intermediate frequency width) |
| Display range of CRT screen | 80 dB(10dB/div) |
| Display range of vertical display | +/-2dB (2 With attenuator) 250MHz signal |
| Input attenuator | 0-40dB (4x10dB step) error: +/-1dB/10dB |
| Maximum input level | +10dBm,+25V DC(Input attenuator set at 0dB)+20dBm (input attenuator set at 40dB) |
| Frequency stability | Over 150KHz/hour |
| Input jack type | BNC |
| Input impedance | 50Ω |
| Power supply | 220V/110V; +/-10%; 50Hz/60Hz |
| Tracing signal generator | |
| Input frequency response | 0.15-1050MHz, 3dB |
| Output level range | -50~+1dBm (4x10dB) +/-3dB |
| Output attenuator | 0-40dB (4x10dB step) error: +/-1dB/10dB |
| Input jack type | BNC |
| Input impedance | 50Ω |
| Others | |
| DC output | +6V (for probe) |
| AM demodulation output | Load impedance ≥16Ω |
*Specification are subject to change without prior notice.
Spectrum Analyzer, SM-5011 spectrum analyzer, 0.15-1050Mhz frequency, w/ Traking Generator