1.15 years guarantee; 2.CE,CCC and ISO9001 certified; 3.Pressurized type,heat-pipe tube automatically running; 4.OEM.

Split pressurized solar water heater

Components

Working Principle

1.When the temperature of  the heat collector reaches the set value,the controller shall start the circulation pump automatically;

2.The circulation pump makes heat-conducting liquid circulate automatically;

3.The heat-conducting liquid transfers heat to water by heat exchanger in the water tank;

4.In case the temperature of the water tank doesn't reach T-max,then the auxiliary heating device starts;

5.In case the temperature of the circulation pump doesn't reach the set value,the circulation pump shall be shut down  automatically.

Features

1.Perfectly concordant with the architecture appearance:solar collector can be installed on roof,balcony or wall of flat,sloping or vertical sides while water tank separates from the solar collector that can be installed in the room;

2.Anti-freezing,more suitable in cold areas,fast start-up on cloudy or rainy days.Realizing hot water availability regardless of time and weather;

3.No water inside vacuum tubes,breakage of some tubes will not influence the ordinary operation of the whole system;

4.Water doesn't flow in vacuum tubes,thus preventing the collectors from freezing and bursting in cold climate;

5.This type of solar water heater works with high pressure,so do the water it produces wihich makes bath more comfortable;

6.Equipped with magnesium bar which improves the water quality and lengthens the lifespan of the storage tank;

7.24 hours water supply on condition that pipeline is working;

8.Works well in cold place even -35°C;

9.OEM,ODM offered.