Ads by Google
CE EN12975 KEYMARK Split Pressurized Solar Water Heater
CE EN12975 KEYMARK Split Pressurized Solar Water Heater General Info.:
The JXSP-SERIAL solar system is combined with solar collector, pressurized storage tank, intelligent controller, solar station, expansion vessel, pipeline etc. 1. Collector: JXSPC-SERIAL, JXSC-SERIAL, or U pipe collectors 2. Tank: pressurized tank, 100L-1500L 3. SP-106, SP116, SP328, SR962, SR962 …solar working station. 4. SR868, SR868C8Q…temperature differential controller
CE EN12975 KEYMARK Split Pressurized Solar Water Heater Working principle:
Split Pressurized Solar Water Heater Characteristics:
1) Tank can be put anywhere of the house
2) Collector can be put on both tilted roof and flat roof
3) Module design, harmony with the building perfectly
4) Intelligent control and automatic operation
5) Superior anti-freeze performance.
CE EN12975 KEYMARK Split Pressurized Solar Water Heater Premium Solar Collector Specification:
Three-target Vacuum Tube Performance and Specification: | ||
Tube structure | All-glass double deck co-axial structure | |
Glass material | High borosilicate 3.3 glass | |
Outer tube diameter and glass thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm | |
Inner tube diameter and glass thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm | |
Tube dimension | 58*1800mm | |
Absorptioncoatingproperty | Coating material | CU/SS-ALN(H)/SS-ALN(L)/ALN |
Sediment method | Three Target magnetron sputtering plating | |
Absorptivity | α =0.92~0.96 (AM1.5) | |
Emission ratio | Emission: ε=0.04~0.06(80°C±5°C) | |
Vacuum degree | P≤5.0X10-3(PA) | |
Stagnation temperature (temperature inside of empty evacuated tubes) | 260~300 °C | |
Average heat loss | ULT 0.4~0.6 W/(m2 *°C) | |
Hail resistance | Ø25 mm | |
24mm Premium Heat Pipe Performance and Specification: | |
Heat pipe material | Oxygen free copper (TU1),Cu=Ag>99.99%(o2<16ppm) |
Condenser dimensions | Top: Ø24mm *65mm,Body: Ø8*0.6mm.length:1750± 10mm |
Heat-transfer-fins | 0.3mm/0.0098’’ thick sets of Aluminum fins,1630mm |
Starting speed | 30s |
Max. operation pressure | 6bar |
Max. testing pressure | 12bar |
Stagnation temperature | 236°C |
Manifold Performance and Specification: | |
Manifold header pipe | TU2 copper |
Manifold casing | Anodized aluminum alloy (6063-T5/T6) |
Insulation layer | Compressed rock wool. |
Bracket Performance and Specification: | |
Bracket | Stronger galvanized steel structure |
Vertical installation angle | Flat roof 0~700 |
Other Components Performance and Specification: | |
58 dia. Anti dust rubber ring | Cymene ethylene silicon rubber(110) |
58 dia. White inner stopper of heat pipe | Cymene ethylene silicon rubber(110) |
58 dia. Tube holder | Nylon 1013-(B) |
58 dia. Tube holder cover | Nylon 1013-(B) |
End cover for manifold | Nylon 1013-(B) |
Left seal ring | Silicon rubber(110) |
EN12975 KEYMARK Split Pressurized Solar Water Heater Water Tank Specification
Water Tank Performance and Specification: | |
Material of out tank | High quality Painted steel/ Stainless steel. |
Material of inner tank | Food grade SUS304-2B stainless steel. |
Tank insulating layer | with 45kg/m³ high-density polyurethane foamed |
Out/inlet connection size(inch) | 3/4inch, NPT |
Copper coil connector size(inch) | 1/2 inch NPT ( 3/4inch,1inch size optional, price different) |
Rated pressure(Mpa) | 0.7 |
Working pressure(Mpa) | 0.6 |
Temp. Control(C) | 30-95C |
Copper coils size(mm) | 12mm/16mm/19mm,optional |
Heat exchanger material | Copper, stainless steel, optional |
Free components: | Electric heater, Magnesium rod, T/P valve, Pressure reducing valve |
REMARK: LUCKY SOLAR, the leading solar collector manufacturer in HAINING,With high quality and competitive price under standards of: SOLAR KEYMARK/EN-12975, SRCC, and CE &ISO.We are pleased to remind you conversion factor of LUCKY JXSPC-30 solar collector is 0.6808! And JXSPC-10 for: 0.73209!
CE EN12975 KEYMARK Split Pressurized Solar Water Heater