1- overview
Solar Energy kit is a small PV generation system which integrated powering for lighting and cell phones charging . It can achieve Ni-MH charge and discharge controlling , Led light constant current output and to supply constant voltages charge for cell phone through its inner efficient control circuit .
2. Operation Description
1) Place the Solar panel where can receive the strongest possible sunlight .
2) The solar Energy Kit is in charging state when the charging LED light indicator is red . When the charging indicator light turns to green , the Solar Energy Kit is fully charged and redy to use . Once charging is complete (when the LED light indictor is green), disconnect the Solar Panen connector cable from the control box .
3) How to use the USB light bulb: Connect the light bulb USB cable to the USB port with a light bulb symbol located on the control box , then switch the Solar Energy Kit to "on" position .
4) Charging for cell phone : connect the phone data line to the charging port which indicated on the control panel .
5) Make sure you locate the correct charging tip for the cell phone you wish to charge .
6) When the solar module is in the state of charging , it has no interference with the ugage of LED and cell phone charger .
5. Specification
Solar Panel Power, size & cable | 5W 22.5X19.5CM 3M |
Internal Battery Type | Ni-MH |
Battery Voltate & Capacity | 6V 3500MAh |
Output 1 Waterproof LED Light Voltage & Current | 3.5V 1000MA |
Output 2 Phone Charge Voltage & Current | 5 V 1000 MA |
Waterproof LED light (with 3M long cable) Option1/ Option 2 | 0.8 W |
Battery Charging Time | 6-8 hrs udner direct sunlight |
Light Time 0.8 w | 7 hurs |
Lifespan Solar_Module LED_Light Battery | No less than 15 Year No less than 10 Year No less than 2 Year |
solar energy kit . convenience use for outdoor .