Ads by Google
INTEGRATIVE PRESSURIZED SOLAR WATER HEATER
About us 11 years experiences
Strict quality insperation ,
located in the coastal areas,
apart from the Shanghai port 125 kilometers,
the highways to Shanghai, shipping very quickly
Specifications:
| Type | Non-pressure |
| vacuum tube | Pict Φ58×1800 |
| tube number | 10.12.15.18.20.24.25.28.30 |
| inner tank | SUS304-2B Φ360 |
| outer tank | Galvanized steelΦ460 |
| thermal insulation layer | Polyurethane foam material to add fluorine free |
| capacity | 100L |
| Circulation Type | Direct / Open Loop (Active) |
| Heating System | Thermosyphon (Passive) |
| Connection Type | Direct-Plug |
| Installation | Freestanding |
Features
Highly efficient absorber of high performance with daily average efficiency over 50%
Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction
Withstand pressure of 6 bar, can be connected directly with city water
No water inside the evacuated tubes , the solar water heater can still in service even with several
tubes breakage
Highly efficient insulation with polyurethane foam
Simple structure, easy to assembly an install
Can be used all year round in the cold climate
Can be used together with auxiliary electric boost
Long service life, can be used over 15 years
Characteristic:
This type of solar water heater works with high pressure
It uses the heat pipe to deliver the heat energy, it can work rapidly
Because of no water in the vacuum tube, there is no tube breakage in the winter, even in the coldest area
Each vacuum tube can work alone, so it can still operate in the event of occasional tube breakage
Installation Instructions:
Because of its work principle, it can pressure up to 6 bar(0.6Mpa) when operates.
So it needn’t height fall. Naturally, you can install the solar water heater on the roof, ground, or on the balcony, when you use hot water on the ground floor or on the second floor.
Packing&Delivery
Carton box for FCLWooden cases for sample ordersDeliver within 15days