1. Inverter System Charge Controller 2. Hybrid controller 3. Multistage charging technology 4. with LED Display

Discription:

The solar charge controllers GIE Solarix 2401 and 4401 are optimally suited for inverter systems. The controller combines basic solar charger functions with a 40 A high-performance charge controller. It is available as 12 V / 24 V and 48 V system. This makes the solar charge controller very cost effective. The load current is limited to 10 A. The charging processes are based on the voltage level, which can be individually set with the help of four buttons behind the front casing.

Product Features:

Hybrid controllerState of charge determination with FangpusumAutomatic detection of voltagePWM controlMultistage charging technology.Load disconnection depending on SOCAutomatic load reconnectionTemperature compensationCommon positive grounding or negative grounding on one terminalIntegrated data loggerIntegrated self testMonthly maintenance charge

Electronic protection functions:

Overcharge protectionDeep discharge protectionReverse polarity protection of load,module and batteryAutomatic electronic fuseShort circuit protection of load and moduleOvervoltage protection at module inputOpen circuit protection without batteryReverse current protection at nightOvertemperature and overload protectionBattery overvoltage shutdown

Display:

Graphical LED display-for operating parameters, fault messages ,self test

Optional Improvements:

Programming by buttonsManual load switchExternal temperature sensorAlarm contact

Specification:

Model	2401	4401
Characterisation of the operating performance
System voltage	12V(24V)	48V
Own consumption	14mA	14mA
DC Input
Open circuit voltage solar module	< 47V	< 82V
Module current	40A	40A
DC Output
Load current	10A
End of charge voltage	13.7V(27.4V)	54.8V
Boost charge voltage	14.4V(28.8V)	57.6V
Equalisation charge	14.7V(29.4V)	58.8V
Reconnection voltage (SOC/LVR)	12.6V(25.2V)	50.4V
Deep discharge protection(SOC/LVD)	11.1V(22.2V)	44.4V
Operating conditions
Ambient temperature	-10°C...+60°C
Fitting and construction
Terminal(fine/single wire)	16mm2/25mm2-AWG 6/4
Degree of protection	IP32
Dimensions(XxYxZ)	187x128x49mm
Weight	550g

Solar Charge Controller 40A