1.solar streetlight charge controller ,street light controller.solar lamp controller 2.12V/24V 3.CE.ROSH 4.2 year

 solar road light controller ,solar light controller ,street light controller , 

   Product Name: Dual load output controller SP-2L Dimensions: 133.5×70×34(mm)

Model:SP-2L seriesThe controller is designed for solar power DC supply system, solar power DC street lamp system and mini solar power station system. Intelligent control is realized by using dedicated computer chips. The controllers can be used in harsh environment, since it adopt the technical grade chips.Function:1. smart controller.2. Individual control: can settings different working modes independently.3. Five kinds of load working mode: Pure lighting control, lighting control & timing control, hand operation and test mode and load open all time.4. the storage battery is charged every 7 days to prevent the battery from Vulcanization. Also have the temperature compensation function.5. Have the electricity protection data function.6.charging circuit is adopt the dual MOS Series control loop, decrease loosing of the loop volt. adopt the PEM mode to control the charging to increase the charge rate.7. The state of solar battery , storage battery and load is showed on the LED. regulate parameters is showed on digital tube. Customer can setting the working mode according to the environment and Observe the operation status.8. Over charging protection, over discharging protection, over load, short circuit protection,reverse polarity protection. TVS lightning protection.9. All controller adopt Industrial chip and precision components, which can operate normally under the cold, heat and humid environment.10.Dual-digit LED screen and double key, easy to use. Parameter Description

Model	SP-2L series
rated charging current	5A 10A 15A 20A
Rated discharging current	5A 10A 15A 20A
Working Voltage	12V ; 24V ; 12V/24V Auto
No load losses	<5mA;
Charging circuit voltage drop	Less than or equal to 0.20V
Discharge circuit voltage drop	Less than or equal to 0.15V
Over voltage protection	17V;×2/24V;
boost charge voltage	14.6V; ×2/24V (time of duration: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage	14.4V;×2/24V (time of duration: 30 minutes)
Float charge voltage	13.6V;×2/24V
Charge recover voltage	13.2V;×2/24V
Over discharge recover voltage	12.5V;×2/24V
Lower voltage indication	12.0V;×2/24V
Over discharge voltage	11.1V;×2/24V
Temperature compensation	-4.0mV/°C/2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method	PWM Smart Charging
Working temperature	From -35°C to +65°C;
Over-load and short circuit protection	Over-load protection: when the current of controller is 1.25 times of the rated current, the controller have 30 seconds to judge; 1.5 times of rated current, have 5 seconds to judge . Short circuit protection: when the current of controller is more than or equal to 3 times of rated current, the protection starts.
Circuit protection	Over-charge, over-discharge, short circuit and over-load protection	All the protections are harmless to any parts and fuse of controller
	Anti- connection-reverse protection for solar battery and storage battery.