Ads by Google
solar thermal collector
Split Pressurized Solar Water Heater System
The whole system is mainly combined by pressurized collector, pressurized tank, working station kit and installation parts.
How It Works:
When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. Heated solar fluid is then circulated from the collectors, through the heat exchanger where its heat is transferred to water in the storage tank. The solar liquid is then pumped back to the collectors to once again be reheated. This circulation will continue as long as there is heat to be drawn from the collectors. The solar heated water in the storage tank is available for distribution to the domestic use, for example, bathing, washing etc. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water.
Advantages:
1) Integrated with the buildings: collectors and tank separated, make solar heaters and buildings combine perfectly.
Can be combined with existing energy source.
2) Modular design, arbitrary combination, harmony with the building perfectly; Intelligent control and automatic operation;
3) Work under high pressure: can operate with pressure up to 0.6Mpa, It can be installed at any position with high pressure, large flow rate, comfortable bathing. There is no water in the tubes, so there is no scale , no breaking and can safely work under very low temperature.
4) Heat pipe technology: it means that the collector can work at low temperature, quick heat transfer and high efficiency.
Specification:
Model | Collector Size | Tank Capacity |
SH-100 | 58*1800*12 tubes | 100 L |
SH-150 | 58*1800*18tubes | 150 L |
SH-200 | 58*1800*24 tubes | 200 L |
SH-300 | 58*1800*36 tubes | 300 L |
SH-400 | 58*1800*48 tubes | 400 L |
SH-500 | 58*1800*60 tubes | 500 L |
Detail picture
work station Includes:
Circulation pump, expansion tank 5L-8L, controller, manometer, flow-meter, pressure relief valve, copper fittings etc.
Technology data:
Working volt: AC220V,50Hz (optional)Consuming power: <3WTemperature test range: 0°-99°CWater temperature controlling attainability precision: ±1°CCirculation pump controlling power: 92WElectric heater power: 1500WCreepage currency: ≤10mA/0.1ssolar thermal collector