Ads by Google
Heat pipe Separated Pressurized Solar hot geysers system working principle: 1. The collector absorbs solar energy and transmits it to the water tank through circulation. 2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically. 3. The circulation pump makes heat-conducting liquid circulate automatically. 4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank. 5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically. 6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically.
Feature solar water heater: 1) Use heat pipe for the heat conduction and can get a high heat absorption efficiency and
rapid heat transfer. 2) the pipeline is made of red copper and conducted by heat transfer medium liquid; the crust uses
aluminium alloy mould material of high strength with airflow design
3) good anti-frozen performance, it can still work under the environment of 30° 4) match with intelligence controller and assistant electrical heater, the system can provide hot water
to you anytime. 5) the insulating layer uses polyurethane bulk bubble and have a good effect of
temperature preservation
Descripition | Solar heater tank |
Material of out manifold | 0.31-0.4mm thickness color steel / fluorine carbon steel |
Material of inner tank | Food grade 1.2-2.0 mm thickness SUS304 stainless steel |
Tank insulating layer | 40mm 45kg/m³ high-density polyurethane foamed |
Inlet and outlet hole | Male G3/4 |
Max pressure | 0.6 Mpa |
Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P less than 0.005 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | h=0.04-0.06(80C±5C) |
Idle sunning prop parameters | Y=220~260m2.C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket: | 2.0mm thickness aluminum alloy |
Welding: | Argon arc welding |
Fastening pieces: | Made of stainless steel screw |
Tank capacity | 150L |
Solar collector | 1pcs 58x1800x20tube solar collector |
Absorber area | 1.875 m² |
Working station | SP106,SP116,SR962 working station |
Heat exchanger length | 15m |
Separated Pressurized Solar hot geysers