Mechanical cable water level float switch for water lever control (CE) Easy to install. Available in different versions.

Vinflo mechanical cable water level float switch

 Vinflo-06, Vinflo-13, Vinflo-20  Level Regulator

Material

Body: polypropylene

Cable: Rubber CE

Technical data

Liquid temperature:  min .0°c (32°F)

                                    max .60 °c (140°F)

Liquid density:  min. 0.95g/cm3

                           max. 1.10g/cm3

Degree of protection: IP68

Micro switch data (import from United State)

Interrupting capacity of micro switch:

AC, resistive load, 250V 10A

AC, inductive load, 250V 3A

With ENEC / VDE Certification

The Vinflo is a build-type lever regulator for lever regulation and control of pumps and valves. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device.

No wear, no maintenance!

In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — Vinflo is the ideal solution.

 

This level regulator is available in different versions. As Mepcato standard, the regulator can be obtained with 6 or 13 or 20 meters (20 or 42 or 65 feet) of cable for liquids with specific density between 0.95 and 1.10 g/cm3.

Example:  4 Vinflo lever regulators for 2 pumps station. 

Vinflo mechanical cable water lever float switch