Instructions

1,Moving the sliding cap upward to connect the power, long press open key for 3 seconds,full screen,change to “00 after 1 second .

2,short press open button to test moisture ”LCD display (“%” flash),short press again to test oil, LCD display (SKIN” flash),continue to short press to test softness , LCD display (“%”and “SKIN “flash),cycle test.

3,After choosing the test items ,please point detecting head to skin position needed to test ,and press a little hard make them fully touch.. Test is finished,and show test results after 10 seconds.

4,if two detecting head haven’t touched or completely touched skin, or touch thick hair and non-skin substance, system will be in waiting test status, if it can’t be touched skin within 10 seconds ,system will show error result ”Er”.

5,result in the display state, if don’t press the key within 10 seconds, the system will automatically enter the shutdowm state. it will take 30 second to finish a complete test, start from moving the sliding cap upward to connect power , waiting test, then showing test results ,till automatically shutdown.

6,after testing each time, please use alcohol cotton or soft paper to wipe detecting head to keep cleaning

7,suggest after cleaning the skin in 15-20 minutes to test, in this time skin no perspiration ,dust and so on, the test result will be more true

Specification:

power source:dc 3v

spraying time:30s

working current:about 400ma

liquid capacity:about 3ml

battery:2xaaa

display:lcd 15*18mm/2digits

test scope:skin softness,skin moisture,skin oil

unit size:145*20*25mm

nano handy mist sprayer,nano facial steamer