Shape              

Cylindrical shaped tank with U-sectional external stiffening rings.

Material  

Mild steel.

Capacity .

Sludge tank 9,500L.

Shell thickness

6mm.

Dish thickness

6mm.

Working pressure

-0.9bar underpressure.

Tipping cylinder

Front tipping cylinder with safety support, provided for maximum liquid removal.

Liquid level indicator

Mounted at the rear of the tank.

Overpressure safety

Overpressure relief valve on tank top.

Rear lid

Rear lid with hydraulically opening operation and heavy,adjustable hinges.

                    Safety Hydraulic check valves with auto check and mechanical hold in upper position.

Outlet Valve

One 150mm ball valve, manual operation.

Float over-flow valve

Shut-off float system prevents overfilling sludge tank.

When the tank’s full, suction hose is closed automatically and a horn signal is activated.

Vacuum pump

Liquid ring vacuum pump, is driven from the PTO on the gearbox, provides high airflows along with high vacuum levels for removing materials above and below liquid surfaces.  

Engaged and disengaged from drivers cab.

Air flow rate

1350m3/h.

Power requirement

50kW.

Rotate speed

Max 1300r/min.

Pump cooling

Cooling Water tank in stainless steel 1,000L, mounted just behind the drivers cab.

Pump protection

1)stainless steel ball valve in the tanker;2)filter;3)auto vacuum check valve.

Suction hose

20m length, ID 4″rubber hose.

Telescopic suction boom

Swivel in both the vertical and horizontal plane.

270°horizontal rotation, 6m working radius and vertical lift up to 5.5m above ground.