1.Stainless steel metal fiber felt 2.3D filtering structure 3.High temperature and high viscosity filtering

Sintered Metal Fiber Felt Cartridges

The sintered metal fiber felt cartridge are manufactured with sintered metal micro-fibers, uniformly distributed to create a 3D filtering structure. The metal felt cartridge are specifically designed for viscous or corrosive fluids, or those with high viscosity.

Features:

3 times greater dirt holding capacity than conventional metal cartridges

Double the porosity and permeability than sinter metal power cartridges

4 times higher flow rate than conventional metal cartridges

No media migration or fiber release

Excellent mechanical strength

Reclothing design available

Main Applications:

High temperature fluids

High viscosity fluids

Toxic or hazardous fluids

Hydraulic oil

Natural or process gases

Process steam

High differential pressure

Corrosive liquids and gases

Cryogenic fluids

Electronic grade liquids or gases

Precious particulate recovery

Sterilization steam

Sintered Metal Fiber Felt technical criteria and deviation

Specifictionμm(c)	Micronμm(c)	Pressure of Bubble Point(pa)		Air PermeabilityL/(min.dm2)		Pore Opening(%)		Pollutant Carry Capacity(mg/cm2)		Thickness (mm)		Breaking Strength(MPa)
		Basic Value	Dev.	Basic Value	Dev.	Basic Value	Dev.	Basic Value	Dev.	Basic Value	Dev.	Basic Value	Dev.
SF5	5	6800	+10%	47	+10%	75	+10%	5.0	+10%	0.30	+10%	32	+10%
SF7	7	5200		63		76		6.5		0.30		36
SF10	10	3700		105		75		7.8		0.37		32
SF15	15	2450		205		79		8.6		0.40		23
SF20	20	1900		280		80		15.5		0.48		23
SF25	25	1550		355		80		19.0		0.62		20
SF30	30	1200		520		80		26.0		0.63		23
SF40	40	950		670		78		29.0		0.68		26
SF60	60	630		1300		85		36.0		0.62		28

  1.Material:SUS316L

  2.Micron:5-60um

  3.Could add protected mesh on both side

Stainless steel fiber felt filter element