Ads by Google
The 12 Channel Receiver receives wireless signals from YTL wireless sensors and switches and provide 12 relay outputs, which are grouped into 3 cases. The connection from the receiver to actuator(relay case) usesnetwork Cat 5 cable. 12 lighting circuits can be controlled by the receiver. Multiple receiverscan form a control network using CAN-Bus system. Computers can also be connected to the control network to query information from the receiversor send control commands to them. In this way, a centralized control can be implemented. Receivers may be installed above ceiling or inside electricity distribution box. There are 2 buttons on a receiver, one is used to make the receiver go into learning mode, and the other is used to clean up the learned information. It has the following characteristics:
l Each receiver has a separate microprocessor, is the most advanced distributed control system.
l Various switching modes are supported, such as delay on/off
l The receiver has various control logic built in. Besides lights, it also can provide controls devices like curtain and HAVC.
Benefits
l Easy installation, easy maintenance
l Support various switching modes
l Up to 12 outputs
l Can self-learning IDs of YTL Wireless Sensors
l Control various electric devices. Such as air-conditioning, lighting, curtain.
l Support USB and Networking
Scope of Use
This product can be used in offices, hotels, schools, homes, factories, hospitals, municipal buildings, and other
indoor places.
Parameters
l Standards-compliant: Q/67218248-4.1-2009
l Working Volt:AC 100V~265V,50Hz/60Hz
l Working Frequency: 868.3MHz/315.0MHz
l Output: 12 relay output.
l Working Temperature: -10°C~60°C, Relative Humidity≤5%,
l Dimensions: 149mm×90mm×60mm
l Material: Fire-Retardant Material ABS
l Protection Type IP30, only available for indoor.
l Position of Installation: can be installed into electricity distribution box, external antenna may be connected (, the length of antenna is 2.5m - 4m).
1.5 Points for Attention
l The temperature of receiver is -10°C~60°C. Power AC100V~265V, 50Hz/60Hz; Use the product out of the scope may cause abnormal work or damage equipment.
l The product is for indoor use only. Avoid dust, moisture, corrosion.
l The product should be installed and used to the place that is non-shake, non-vibration. The position of antenna should far away from metal and other radio devices or devices generating electric noises
l Avoid electric shock, non-professional people can’t unpack the receiver.
( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v5/498470641_1/868MHz_12_Channel_Receiver.jpg' , 'http://i01.i.aliimg.com/photo/v5/498470641_2/868MHz_12_Channel_Receiver.jpg' , 'http://i01.i.aliimg.com/photo/v5/498470641_3/868MHz_12_Channel_Receiver.jpg' , 'http://i01.i.aliimg.com/photo/v5/498470641_4/868MHz_12_Channel_Receiver.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 868MHz 12 Channel Receiver