wood pellet mill is the most ideal grinding equipment of all kinds of wood peices,wood shavings,grass,straw,stalk,corn,weeds.

*The shell is welded by steel plate,the site in the crush room which connects to the materials all use the wearable and commutative parts and double wear plate.

*The motor and rotor are installed in the same heavy duty base ,using coupling direct drive ,the rotor are checked by dynamic balance ,and can work forward and reverse, the hammers are arranged symmetrically.

*The second grinding for grinding chamber, the output can increase 15% even particle size

*Two kinds of gap between beaters and screeners through changing position of beater are used for coarse and fine grinding

*Applicable for raw materials grinding for feed mill ,food plant ,solvent plant ,alcohol plant, citric acid plant ,oil plant ,brewing plant ,flour plant with different capacities.

Main technical parameters:

Model No.	SD56*27	SD56*36	SD56*40
Rotor diameter(mm)	560	560	560
Width of crush room	270	360	400
Main spindle speed	2940	2940	2940
Wire-speed of hammer(m/s)	86	86	86
Numbers of hammer(pieces)	4*4=16	4*5=20	4*6=24
Power(kw)	11/15	18.5/22	30/37
Aspirating capacity(m3/min)	12-15	16-18	22-25
Capacity(t/h)	0.8-1.5	1-3	2-5

wood pellet hammer mill