Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer

DIGITAL SATELLITE (DVB-S) & TERRESTRIAL SIGNAL FINDER (DVB-T) Real Spectrum Analyzer

Now with dBm, dBmV or dBµV measurements in DVB-S+T

Satlink WS-6936 DVB-S&T is an simple Messcomputer for DVB-S+T

Satlink WS-6936 DVB-S&T has a built in TFT LC Display with 3,5" / 8,9cm

Satlink WS-6936 DVB-S&T is excellent for DVB-S+T antenna Installitions

Satlink WS-6936 DVB-S&T can also use as a DVB-S+T Receiver on a TV

Satlink WS-6936 DVB-S&T work with files from USB-stick (Format JPG + MP3)

AV-IN & OUTPUTSatlink Satlink WS-6936 DVB-S&T can be connected as a standard receiver to a TV. In addition, the device has an AV input. At this, other playback devices or AV surveillance cameras to be connected!

MultimediaPlayerDisplay of photos stored in JPG format and play MP3 files from your own USB drive!

PC Software CTK-DB TOOL

With the PC software "CTK-DB tool" you can edit the transponder / satellite list.

The final lists will be using a USB - memory stick to transfer to the meter.

For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.

Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.

DVB-T:

DVB-S:

OTHER:

Technical Parameter:

Tuner DVB-T:

Connector:

IEC-Typ, IEC 169-2

Frequency Range:

76 MHZ - 870 MHZ

Signal Level:

40 dB/µV - 110 dB/µV

Demodulation:

CODFM

Mode:

2K, 8K

FEC:

1/2, 2/3, 3/4, 5/6 & 7/8

Channel Range:

6MHz / 7MHz / 8 MHz

Tuner DVB-S:

Connector:

F- Socket

Frequency Range:

950 MHz - 2150 MHz

Signal Level:

-65 dB/µV~-25 dB/µV

LNB Power:

13/18 V, max 400 mA

Mode:

2K, 8K

LNB Control:

22 KHz

DiSEqC :

Ver. 1.0, 1.2

MPEG Transport Stream A/V Decoding:

Transportstream:

MPEG-2 ISO/IEC 13818

Profile Level:

MPEG2 MP@ML

Input Rate:

15 Mbit/s Max

Video Resolution:

720 x 576 (PAL), 720 x 480 (NTSC)

Audio Decoding:

MPEG / MusiCam LayerI&II

Demodulator:

Front End:

QPSK

Symbolrate:

2 Mbps~45 Mbps

SCPC and MCPC:

YES

Spectrum Analyzer:

YES

MEMORY:

SDRAM:

16* MB

FLASH:

8 MB

Serial connection:

TYP:

USB

Power Supply:

Li-oN Battery

3000 mA/h

Voltage:

8,4 Volt

Charger:

90 - 240 V / AC - 12 V / DC 1 A

Package including:

Sample Images:

SAT

Main-Menu

following sub-menu items can be selected:

Fast-Search

Quick Search in the menu item you can select a desired satellite to search.

43 satellites are pre-programmed.

The satellite list can be edited with a special computer program and are then loaded with a USB memory stick to the device.

Quick Search / satellite selectionA variety of satellites are preprogrammed and are already in the database.

Satellite Scan:

After selecting the desired satellite you get into the search mode.

The following measured values are displayed:

In this menu item to control is a transponder scan may be performed. Then can be displayed after leaving the satellite search the channels found in picture and sound.

Zoom-Function

By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

DISEQC 1.0/1.1

Here you can set the DiSEqC settings and store for up to 4 satellite DiSEqC ports.

DiSEqC motor control:

After selecting a satellite, you can gradually control a DiSEqC motor or with goto-X to a desired point.

The signal strength and quality appears.

Transponder Administration

Here you can add or delete transponders, and editing. The frequency, symbol rate and polarization can be chosen freely.

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.

System - Setup:

The system allows the following settings:

DVB-T

Quick-Find

In the Quick Find menu to select a transponder for search.

Select the country, the desired channel and the bandwidth.

In addition, can be turned on the power supply for active antennas.

Channel Scan

If a signal is received so the following measured values are displayed:

Be carried out to control a channel search. Then can be displayed after exiting the channels found in the search image and sound.

Zoom-Function

By switching in the Quick Seach , the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

Channel-Scan

Freq-Checking

It is possible to measure five channels simultaneously and the measured values simultaneously display.

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.