Safety work belt Safety work belt produced to EN358:2000 Safety work belt With soft comfortable thigh and back protection

 Safety work belt TE5207 is designed to enable the wearer to perform his work without  undue discomfort and remain secure against the hazard of a fall from a height. Essential fastening and adjustment elements shall remain accessible to the wearer and operate effectively when manipulated by hand.

NOTICE:1)Fasten the  Safety work belt around the waist so that it may not slip off from your body if a drop should occur.2)Pass the belt Safety work belt  through the buckle rightly, and place the "D" ring just on the side of the body.3)Set the life line to a support, which is strong enough for a shock, upper than your waist as much as possible in order to confine the dropping distance to the minimum4)Do not use the life line on the beam or angle with sharp edges. And where it is exposed to sparks or spatters.

KEEPING OF SAFETY WORK BELT:1)Keep the Safety work belt exposed to the fresh air in the shade.2)Keep the Safety work  belt on a pole or a wall not on the ground directly.3)Be careful a life line not kink.4)Do not keep the Safety work  belt in a room with chemicals ( acids: alkaline substances.Organic solverks, etc)

USE OF SAETY WORK BELT:

It is always be used for mountain climbing protection. 

EN358 CE Safety Belt