High quality ratchet buckle: 1.Bend length:38mm 2.Height:49mm 3.Arm length:155mm 4.BS:2000KG/4400LBS

1.1.5'' 2T Rubber Coating Ratchet Buckle

2.All our products have passed ISO9001 tested.

3. This product is of good quality. We are ensure all our products are of high quality and resonable price. OEM is greatly welcomed!

 

 

To operate a ratchet Buckle, pull the webbing through the mandrel bars eliminating any slack.Operate the ratchet handle back and forth until the webbing is properly tensioned. The mandrel bars must have at least two wraps of webbing to prevent slippage. To release the webbing, Pullthe handle pawl tothe fully poened position and rotate the handle itself past the center position on the ratchet to the fully open position. Finally. Pull the webbing back through the mandrel slack.

 

Attentions:

1.Fittings are attachet based on the needs.

2.Attention:lifting goods is prohibited.

3.Standard length is 8m,but can be modified as 1m to 50m.Temperature range :-40°C-100°C.

4.Only use the no damaged ratchet straps,the label can clearly show the ability.

5.Don't tie knot the belt.

6.Can use a protection sleeve to make the fabric keep away from sharp angle,avoid wraring out or incision.

7.Avoid distortion.wring ratchet straps.

8.Don't place object on the ratchet straps,it will cause injury

                     

38mm black rubber coating ratchet tie down