max opening crimping machine can crimp the high hydraulic hose up to 2inch. The swaging force is 5300KN. Max opening is 119m

Max opening crimping machine-KM91C's technical data:

Crimp range :                   1/8”~2” 4 SPPrecision :                         0.01mm Voltage :                           380/4kw ( 3 phase)Max opening without die:          122mmOpening:                   ±28mmPressing force :                5300KNOptional voltage:              220/2.2kwDie set :                           10 setsSystematic pressure:        31.5MpaNoise level:                      65dBWeight:                           304KgL*W*H:                           800mm*595mm*1376mm

 Production introduction:

1.Set with self-filling oil up, which can fill oil automatically and evenly.2.2The new bracket on the machine completely changes the drawback that we must connect the machine and bracket by weld.3.NEW foam inserts can protect your machine from debris dropping into the bottom of the head. With there you will minimize the risk of debris getting into the cylinder which could cause damage to seals and other moving parts of the head. This will significantly extend the life of hydraulic hose crimping machine. 4.There are lubricated groove on the frictional surface, in which self-supported oil can come true.

max opening crimping machine