Tire Retreading Equipment Curing Chamber 1.Advanced design chamber for precure tire retreading 2.FREE training&installation

 Tire Retreading curing chamber /Autoclave parameters following:

Specification:8pcs Curing Chamber for Truck Tyre and passenger bus tiresRange of Tyre Size:Within Size of 12.00-24 Truck and Passage Bus Tyre15''-24''Operating Worker No.:Min. 5 Staff

Workshop Area:Min. 200m2Max Service Power:50kw

Curing Time:220Minutes/per shift(Timing at 112°C)Max Daily Work Shift:3 shifts/dayMax Daily Output:24pcs/day for within ruled max size tyreMin Required Power:380V,50HZ.,30KWMin Required Air Supply:0.8MpaMin Air Compressor:1pcs(Air Displacement:1.5m3/min;Work Prssure:1.20Mpa;Auto Power:11KWMin Required Air Storage:1pc(Storage Volume:1M3;Work Prssure:1.25Mpa;Temperature:100°C)

Autoclave for tires,curing chamber for tires,Tire retreading equipment

he benefits of retreading are that it is both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberised for a "new tyre life". To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tonnes per year! To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed.machine capable for tire models from 650-1200(15'' 16'' 20'' 22.5'') Tehnical Parameters:1.Rubbing head speed:2930 r/min. Powered by15kw2.Clamping wheel speed: 42r/min3.Rubbing tool model: R4-25 4.Total electricity power: 22kw

Curing Chamber-precure autoclave for tires